Abstract
Ultrathin films of para-hexaphenyl (6) were prepared on freshly cleaved and sputter-amorphized mica(001) by physical vapor deposition. Ex situ atomic force microscopy (AFM) revealed a bimodal island size distribution for the films on both surfaces. On freshly cleaved mica long needlelike islands exist, which are surrounded by small crystallites. On the sputter-amorphized substrates, large dendritic islands exist which are again surrounded by small, compact islands. We could prove by thermal desorption spectroscopy that the small islands are the result of adsorbate-induced subsequent nucleation, when the films were exposed to air. In case of the freshly cleaved mica, islands grow on a wetting layer in vacuum. This layer dewets and forms the small islands upon venting, due to the adsorption of water. In the case of the amorphous mica substrate an equilibrium exists between the islands and a two-dimensional gas phase in the sub-monolayer regime. Again, the latter phase nucleates after venting. In a particular coverage range, islands due to nucleation during deposition and subsequent nucleation coexist on the substrate, leading to the bimodal island size distribution. Kinetic Monte Carlo (KMC) simulations were performed to model the nucleation process after venting on the sputter-modified mica substrate. The density of the subsequently nucleated islands just depends on the initial coverage and the critical island size. A critical cluster size of 7 molecules was determined for 6 on amorphized mica, by comparing the KMC results with the AFM images in case of adsorbate-induced nucleation. Furthermore, the experimentally obtained island size distributions could be well reproduced by KMC simulations.
11 More- Received 20 February 2012
DOI:https://doi.org/10.1103/PhysRevB.86.085402
This article is available under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.
Published by the American Physical Society