Abstract
This work extends the input-output approach to the study of wall-bounded shear flows manipulated using actuators common in experimental flow control studies. In particular, we adapt this powerful analytical framework to investigate the flow response to specified geometric actuation patterns (e.g., different plasma actuators) that can be applied over a range of different temporal input signals. For example, the commonly studied steady-state (time-averaged) flow response corresponds to a superposition of step responses in our modeling framework. The approach takes advantage of the linearity of the transfer function representation to construct the actuated flow field as a weighted superposition of the flow responses to point sources of varying intensity comprising the actuation model. We first validate the proposed method through comparisons with numerical and experimental studies of the time-averaged behavior of a transitional boundary layer actuated using a dielectric-barrier discharge plasma actuator operating in constricted discharge mode. The method is shown to reproduce the streamwise velocity field and the vortical structures observed downstream from the tested plasma actuator configurations. We then demonstrate that the method provides even better agreement with the steady-state response of the boundary layer subject to actuation from arrays of symmetric plasma actuators arranged in both spanwise and serpentine geometries. These results indicate the utility of this extension to the widely used input-output framework in analyzing the effects of certain actuation modalities that have shown promise in flow manipulation strategies for drag reduction. An important benefit of this analytical method is the low computational cost associated with its use in extensive parametric studies that would be cost-prohibitive using experiments or high-fidelity simulations.
- Received 11 January 2021
- Accepted 12 April 2021
DOI:https://doi.org/10.1103/PhysRevFluids.6.053901
©2021 American Physical Society